ansible-role-debian-installer/templates/preseed.cfg.j2

#### Contents of the preconfiguration file (for jessie)
### Localization
# Locale
d-i debian-installer/language string de
d-i debian-installer/country string DE
d-i debian-installer/locale string de_DE.UTF-8

# Keyboard selection.
d-i keyboard-configuration/xkb-keymap select de
d-i keyboard-configuration/toggle select No toggling

### Network configuration
{% if (networks is defined) and (netname is defined) and (networks[netname] is defined) %}
d-i netcfg/choose_interface select {{ networks[netname].mac | default("auto") }}

{% if (networks[netname].type is defined) and (networks[netname].type == 'static') %}
d-i netcfg/disable_autoconfig boolean true
d-i netcfg/get_ipaddress string {{ networks[netname].ip | ipaddr('address') }}
d-i netcfg/get_netmask string {{ networks[netname].ip | ipaddr('netmask') }}
d-i netcfg/get_gateway string {{ networks[netname].gateway }}
d-i netcfg/get_nameservers string {{ networks[netname].nameservers | join(" ") }}
d-i netcfg/confirm_static boolean true
{% endif %}
{% endif %}

### Network console
{% if network_console is defined %}
d-i anna/choose_modules string network-console
d-i network-console/password-disabled boolean true
{% endif %}

### Hostname
d-i netcfg/hostname string {{inventory_hostname}}

### Mirror settings
d-i mirror/country string manual
d-i mirror/http/hostname string debian.thengo.net
d-i mirror/http/directory string /debian
d-i mirror/http/proxy string

### Account setup
# Skip creation of a root account (normal user account will be able to
# use sudo).
d-i passwd/root-login boolean true
# Alternatively, to skip creation of a normal user account.
d-i passwd/make-user boolean true

# Root password
d-i passwd/root-password-crypted password {{ passwords_hashed["root"] }}

# local-admin
d-i passwd/user-fullname string Administrator
d-i passwd/username string local-admin 
d-i passwd/user-password-crypted password {{ passwords_hashed["local-admin"] }}
d-i passwd/user-uid string 999

### Clock and time zone setup
d-i clock-setup/utc boolean true
d-i time/zone string Etc/UTC
d-i clock-setup/ntp boolean true
d-i clock-setup/ntp-server string ntp1.thengo.net ntp2.thengo.net ntp3.thengo.net

### Partitioning
{% if partitioning is defined %}
## Partitioning example
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
#d-i partman-auto/init_automatically_partition select biggest_free

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home:   separate /home partition
# - multi:  separate /home, /var, and /tmp partitions
d-i partman-auto/choose_recipe select atomic

## Controlling how partitions are mounted
# The default is to mount by UUID, but you can also choose "traditional" to
# use traditional device names, or "label" to try filesystem labels before
# falling back to UUIDs.
d-i partman/mount_style select uuid

d-i partman/default_filesystem string btrfs

#d-i partman-auto/disk string /dev/sda

d-i partman-auto/method string regular

# partitioning
d-i partman-basicfilesystems/choose_label string gpt
d-i partman-basicfilesystems/default_label string gpt
d-i partman-partitioning/choose_label string gpt
d-i partman-partitioning/default_label string gpt
d-i partman/choose_label string gpt
d-i partman/default_label string gpt
d-i partman-partitioning/choose_label select gpt

partman-base    partman/default_filesystem      string  btrfs

d-i partman-auto/choose_recipe atomic

# This makes partman automatically partition without confirmation.
d-i partman-md/confirm boolean true
d-i partman-md/confirm_nooverwrite boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# do not complain about missing swap partition
#d-i partman-basicfilesystems/no_swap boolean false
{% endif %}

### Apt setup
# You can choose to install non-free and contrib software.
d-i apt-setup/non-free boolean {{ nonfree_firmware }}
d-i apt-setup/contrib boolean {{ nonfree_firmware }}
d-i apt-setup/services-select multiselect security,updates
d-i apt-setup/security_host string security.debian.org

### Package selection
tasksel tasksel/first multiselect minimal

# Individual additional packages to install
d-i pkgsel/include string openssh-server python python-apt

# Whether to upgrade packages after debootstrap.
# Allowed values: none, safe-upgrade, full-upgrade
d-i pkgsel/upgrade select full-upgrade

# Some versions of the installer can report back on what software you have
# installed, and what software you use. The default is not to report back,
# but sending reports helps the project determine what software is most
# popular and include it on CDs.
popularity-contest popularity-contest/participate boolean false

### Boot loader installation
{% if bootloader is defined %}
# This is fairly safe to set, it makes grub install automatically to the MBR
# if no other operating system is detected on the machine.
d-i grub-installer/only_debian boolean true

# This one makes grub-installer install to the MBR if it also finds some other
# OS, which is less safe as it might not be able to boot that other OS.
d-i grub-installer/with_other_os boolean true

d-i grub-installer/bootdev string {{ bootdev | default("default") }}

d-i grub-installer/password-crypted password {{ passwords_hashed["grub"] }}
{% endif %}

### Finishing up the installation
# Avoid that last message about the install being complete.
d-i finish-install/reboot_in_progress note

### Running custom commands during the installation
d-i preseed/run string run.sh
d-i preseed/run/checksum string {{ run_sh.stat.md5 }}

d-i preseed/late_command string mkdir -p /target/root/.ssh; cp /.ssh/authorized_keys /target/root/.ssh/authorized_keys; mkdir -p /target/home/local-admin/.ssh; cp /.ssh/authorized_keys /target/home/local-admin/.ssh/authorized_keys;