plugin {

    ##################
    # dovecot-antispan

    # GENERIC OPTIONS

    # Debugging options
    # Uncomment to get the desired debugging behaviour.
    # Note that in some cases stderr debugging will not be as
    # verbose as syslog debugging due to internal limitations.
    #
    # antispam_debug_target = syslog
    # antispam_debug_target = stderr
    # antispam_verbose_debug = 1
    #
    # This can be used to get a prefix, e.g. by specifying %u in it
    # antispam_debug_prefix = "antispam: "

    # backend selection, MUST be configured first,
    # there's no default so you need to set one of
    # these options:
    antispam_backend = crm114
    # antispam_backend = dspam
    # antispam_backend = pipe
    # antispam_backend = spool2dir

    # mail signature (used with any backend requiring a signature)
    # antispam_signature = X-DSPAM-Signature

    # action to take on mails without signature
    # (used with any backend requiring a signature)
    # (we recommend only setting this to 'move' after verifying that the
    # whole setup is working)
    # antispam_signature_missing = move # move silently without training
    antispam_signature_missing = error

    # The list of folders for trash, spam and unsure can be given
    # with three options, e.g. "trash" matches the given folders
    # exactly as written, "trash_pattern" accept the * wildcard at
    # the end of the foldername, "trash_pattern_ignorecase"
    # accepts the * wildcard at the end of the foldername _and_
    # matches the name case insensitivly.

    # the *-wildcard with the following meaning:
    #    * at the end: any folder that _start_ with the string
    # e.g.:
    #	antispam_trash_pattern = deleted *;Gel&APY-schte *
    # match any folders that start with "deleted " or "Gelöschte "
    # match is _case_senstive_!
    #
    #	antispam_trash_pattern_ignorecase = deleted *;Gel&APY-schte *
    # match any folders that start with "deleted " or "gelöschte "
    # match is _case_insenstive_, except the non-USASCII letters,
    # "ö" in this example.
    # To match the upper-case Ö, too, you need to add yet another
    # pattern "gel&ANY-schte *", note the different UTF7 encoding:
    # &ANY- instead of &APY-.


    # semicolon-separated list of Trash folders (default unset i.e. none)
    # antispam_trash =
    # antispam_trash = trash;Trash;Deleted Items; Deleted Messages
    # antispam_trash_pattern = trash;Trash;Deleted *
    # antispam_trash_pattern_ignorecase = trash;Deleted *

    # semicolon-separated list of spam folders
    antispam_spam = SPAM
    # antispam_spam_pattern = SPAM
    # antispam_spam_pattern_ignorecase = SPAM

    # semicolon-separated list of unsure folders (default unset i.e. none)
    antispam_unsure = inbox/unsure
    # antispam_unsure_pattern =
    # antispam_unsure_pattern_ignorecase =

    # Whether to allow APPENDing to SPAM folders or not. Must be set to
    # "yes" (case insensitive) to be activated. Before activating, please
    # read the discussion below.
    # antispam_allow_append_to_spam = no

    ###########################
    # BACKEND SPECIFIC OPTIONS
    #

    #===================
    # dspam plugin

    # dspam binary
    # antispam_dspam_binary = /usr/bin/dspam

    # semicolon-separated list of extra arguments to dspam
    # (default unset i.e. none)
    # antispam_dspam_args =
    # antispam_dspam_args = --deliver=;--user;%u  # % expansion done by dovecot
    # antispam_dspam_args = --mode=teft

    # Ignore mails where the DSPAM result header contains any of the
    # strings listed in the blacklist
    # (default unset i.e. none)
    # antispam_dspam_result_header = X-DSPAM-Result
    # semicolon-separated list of blacklisted results, case insensitive
    # antispam_dspam_result_blacklist = Virus

    # semicolon-separated list of environment variables to set
    # (default unset i.e. none)
    # antispam_dspam_env =
    # antispam_dspam_env = HOME=%h;USER=%u

    #=====================
    # pipe plugin
    #
    # This plug can be used to train via an arbitrary program that
    # receives the message on standard input. Since sendmail can be
    # such a program, it can be used to send the message to another
    # email address for training there.
    #
    # For example:
    #   antispam_pipe_program = /path/to/mailtrain
    #        (defaults to /usr/sbin/sendmail)
    #   antispam_pipe_program_args = --for;%u
    #   antispam_pipe_program_spam_arg = --spam
    #   antispam_pipe_program_notspam_arg = --ham
    #   antispam_pipe_tmpdir = /tmp
    # will call it, for example, like this:
    #   /path/to/mailtrain --for jberg --spam
    #
    # The old configuration options from when this plugin was called
    # "mailtrain" are still valid, these are, in the same order as
    # above: antispam_mail_sendmail, antispam_mail_sendmail_args,
    # antispam_mail_spam, antispam_mail_notspam and antispam_mail_tmpdir.
    #
    # Alternatively, if you need to give multiple options, you can use
    # the spam_args/notspam_args parameters (which are used in preference
    # of the singular form):
    #   antispam_pipe_program_spam_args = --spam;--my-other-param1
    #   antispam_pipe_program_notspam_args = --ham;--my-other-param2
    # which will then call
    #   /path/to/mailtrain --for jberg --spam --my-other-param1

    # temporary directory
    antispam_pipe_tmpdir = /tmp

    # spam/not-spam argument (default unset which will is not what you want)
    # antispam_pipe_program_spam_arg =
    # antispam_pipe_program_notspam_arg =

    # binary to pipe mail to
    antispam_pipe_program = /usr/sbin/sendmail
    #antispam_pipe_program_args = -f;%u@example.com # % expansion done by dovecot

    #===================
    # crm114 plugin

    # mailreaver binary
    # antispam_crm_binary = /bin/false
    antispam_crm_binary = /usr/share/crm114/mailreaver.crm

    # semicolon-separated list of extra arguments to crm114
    # (default unset i.e. none)
    # antispam_crm_args =
    # antispam_crm_args = --config=/path/to/config

    # semicolon-separated list of environment variables to set
    # (default unset i.e. none)
    # antispam_crm_env =
    antispam_crm_env = HOME=%h;USER=%u

    # NOTE: you need to set the signature for this backend
    antispam_signature = X-CRM114-CacheID

    #===================
    # spool2dir plugin

    # spam/not-spam spool2dir drop (default unset which will give errors)
    # The first %%lu is replaced by the current time.
    # The second %%lu is replaced by a counter to generate unique names.
    # These two tokens MUST be present in the template! However
    # you can insert any C-style modifier as shown.
    # antispam_spool2dir_spam    = /tmp/spamspool/%%020lu-%u-%%05lus
    # antispam_spool2dir_notspam = /tmp/spamspool/%%020lu-%u-%%05luh
}